Loading...
Loading...

PRO V USER GUIDE

YOUR COMPLETE GUIDE TO THE WORKINGS OF THE PRO V
Home / PRO V USER GUIDE

THE COMPLETE USER GUIDE

Please see the full user guide below. If you have any unaswered questions about your device, feel free to contact us: info@electrostix.co.za

STEP 1: CHARGING THE PRO V BATTERY

Before the device can be utilised, remove PRO V Batteries from casing and unscrew the cap from the base of the PRO V Battery. Proceed to plug the Micro USB Charger into the bottom of the PRO V Battery. After completion, either attach the Micro USB Charger to the wall adapter, or plug into a USB port of a power source. The Micro USB charger LED will emit a Red light at the bottom of the battery. (Once fully charged, the PRO V Battery will stop emitting a red light).

NOTE: Please only remove the PRO V Battery for use, once fully charged. Charge within the temperature range of 0 – 40 degrees Celsius.

NB: The PRO V can be used while it is on charge!


STEP 2: FILLING THE PRO V CLEAROMISER WITH E-LIQUID

Before you can start vaping, you will need fuel for your device, in the form of E-Liquid. Unscrew the PRO V Connector from the PRO V Clearomiser, and proceed to add E-Liquid content to the vertically held PRO V Clearomiser (Amount of E-Liquid used is up to the user – Do not let the E-Liquid overflow into the air flow passage of the PRO V Clearomiser). Once you have refilled the desired amount of E-Liquid, screw the PRO V Connector to the PRO V Clearomiser.

NOTE: Keep the PRO V Clearomiser in a vertical position throughout this process to avoid spillage)


STEP 3: CONNECTING THE PRO V DEVICE

Screw the filled PRO V Clearomiser into the PRO V Battery. (Make sure the connection is secure) . Turn on/unlock the battery by clicking the button 5 times within 2 seconds). The PRO V Battery will flash a blue LED x 3 times to indicate the PRO V Battery has been turned on/off.


STEP 4: TIME TO START YOUR VAPING EXPERIENCE

Place your lips over the PRO V Clearomiser mouth piece. Hold down/push the button on the PRO V Battery (Button will emit a blue LED) NOTE: (Only hold down/push the button, while you are taking a drag/inhaling). Release the button when you stop inhaling the vapour. The duration in which you inhale is up to personal preference (The longer the inhalation results in an increase in vapour, flavour and throat hit).

NOTE: You can adjust the airflow by twisting airflow ring. The wider the airflow gap, the more air is able to be drawn. Find your perfect airflow and enjoy!


STEP 5: TURNING YOUR DEVICE OFF

When you are satisfied with your vape, try and get into the habit of turning the PRO V Battery off. To do so click the on/off button 5 times within 2 seconds.

HOW TO FILL THE PRO V CLEAROMISER

Unscrew the PRO V Connector from the PRO V Clearomiser, and proceed to add E-Liquid content to the vertically held PRO V Clearomiser (Amount of E-Liquid used is up to the user – Do not let the ELliquid overflow into the air flow passage of the PRO V Clearomiser). Once you have filled the PRO V Clearomiser with the desired amount of E-Liquid, screw the PRO V Connector to the PRO V Clearomiser.

NOTE: Keep the PRO V Clearomiser in a vertical position throughout this process to avoid spillage.


WHEN TO REPLACE THE PRO V CLEAROMISER

The Electrostix PRO V Clearomiser will only need to replaced if the following extreme cases occur:

If the tube is cracked
The centre air flow passage is bent
If the thread is damaged

NOTE: The PRO V Clearomiser is what contains the PRO V Coil. The PRO V Coil is the component which must be replaced regularly in order to maintain proper functioning. (See Component information on the PRO V Coil).

NOTE: Keep the PRO V Clearomiser in a vertical position throughout this process to avoid spillage.


ADJUSTING THE AIRFLOW

The PRO V Clearomiser has adjustable airflow which allows the user to increase or decrease the desired amount of vapour and throat hit.

NOTE: You can adjust the airflow by twisting airflow ring. The wider the airflow gap, the more amount of air is able to be drawn. Find your perfect airflow and enjoy!

HOW TO CHARGE THE PRO V BATTERY

Firstly, unscrew the bottom cap from the PRO V Battery. Proceed to gently insert the Micro USB Charger into the PRO V Battery. Then either attach the Micro USB Charger to the wall adapter, or plug it into a USB port of a power source. The PRO V Battery will emit a steady red light at the base of the battery, to indicate the battery is charging. (Once fully charged, the PRO V Battery will stop emitting a red light and automatically be turned on. To turn off the PRO V Battery, click the button 5 times within 2 seconds.

NOTE: Only remove the PRO V Battery for use, once fully charged (No Light indicates fully charged capacity). Please charge within the temperature range of 0 – 40 degrees Celsius.

NB: The PRO V can be used while it is on charge!


CHARGING TIME

Charging time is between 45-90 minutes (Charging time will gradually increase over the duration of use of the PRO V Battery)


HOW TO SWITCH THE PRO BATTERY ON/OFF

5 Click on/off button system. 5 Clicks within the duration of 2 seconds, will turn the PRO V Battery on/off.


USAGE TIME

The fully charged PRO V Battery will last between 1-4 days depending on personal usage. (The time stated is only appliable to the 900mah PRO Battery)

Usage time, will gradually decrease, over the duration of use of the PRO V Battery.

MAKING SURE THE PRO V COIL IS TIGHTLY SECURED

The PRO Coil must be tightly secured into the base of the PRO Clearomiser. Twist clockwise to tighten. If the PRO Coil is not tightly secured, leaking will occur.

NOTE: The PRO Clearomiser is what contains the PRO Coil. The PRO Coil is the component which must be replaced regularly in order to maintain proper functioning.


REPLACING THE PRO V COIL

The PRO V Coil is a consumable component of the PRO V Clearomiser. The PRO V Coil needs to be replaced every 1-4 weeks based on the users personal vaping habit.


WHEN SHOULD YOU REPLACE THE PRO V COIL

PRO V Coils should be replaced once the user experiences any of the following:

1. A burnt taste when inhaling
2. Lack of vapour production
3. Difficulty to inhale vapour
4. Lack of flavour


HOW TO REPLACE THE PRO V COIL

1. Turn the PRO V Clearomiser upside down and unscrew the PRO V Connector.

2. Carefully unscrew the PRO V Coil head from the PRO V Connector.

3. Screw the new PRO V Coil head into the PRO V Connector and proceed to re-screw the PRO V Connector with new PRO V Coil to the PRO V Clearomiser. (Make sure the PRO V Clearomiser, and PRO V Connector are properly secured to avoid leaking)

It is recommended that an excess of 5 PRO V Coils are to be kept by the user at all times. This is to ensure that you are prepared for replacing the PRO V Coil at all times and are therefore able to proceed with your vaping.

TOOLS TO CLEAN THE PRO V CLEAROMISER

Use distilled hot/warm water
Do not use soaps, or cleaning detergents
Make use of dry cloth/tissue paper for drying
Ear bud for cleaning/wiping


WHEN TO CLEAN THE PRO V CLEAROMISER

Before every refill of new E-Liquid.

If not before refilling with new E-Liquid, clean every 3 days.


HOW TO CLEAN THE PRO V CLEAROMISER

Use hot/warm distilled water in a cup to clean the PRO V Clearomiser, unscrew all PRO V Clearomiser components, including the PRO V Coil and place in hot/warm distilled water for 5-10 minutes.
Use the ear bud/dry cloth and tissue paper to wipe away and dry excess moisture off all the components.
Leave on a clean, dry surface such as tissue paper/dry cloth to dry until 100% of moisture is removed.
Once dried reconnect all components and proceed to use device.